Before application insure that the new concrete is cured as per norms . For best results,
Finishing & topping must be complete the surface must be fully dried.
Clean the surface for oil, dust, fungus , grassroots, rust , loose material by mechanical tools, vacuum cleaner, high pressure water jet etc.
Aquasil -99 Solution formation :-
Dilute 1 part of Aquasil-99 with 20 parts of potable water (Tap Water ) with vigorous stirring to get clean transpirent solution.
Do not store diluted Aquasil-99 solution over night
Application System :-
To achieve an adequate uniform coating & impregnating the masonry surface brush ,roller,low pressure sprayers etc. are suitable. Avoide fogging while coating . Apply till saturation .
To avoid white spots do not apply on uneven surface
To develop maximum water repellency the treated surface should be allowed to dry for at least 24 hours.
Imparting water repellency to concrete/ reinforced concrete as in:
For Treatment of manufactured and natural stones like Lime Stone, Sand Stone, precast stone , Granite & Ceramics to reduce efflorescence, to keep surface Clean and to improve resistance to weathering.
For Coating of concrete, open bricks , Glazed and Decorative tiles to seal off moisture. or combating capillary rising damp in masonry by injection into bore holes.
Drastic Reduction in masonry maintenance cost with long term improved resistance to vagaries of weather.
Protects Building , saves energy, keeps Substrate dry reducing the thermalconductivity.
A very economical water dilutable solution designed to impart repellency to masonry surface.
Precaution & Limitations :-
Avoid contact with skin & eyes.
Put on goggles & gloves while handling the product. In case of contact with eyes or skin wash with plenty of water immediately. Store in a cool & dry place in its original packing.
Under freezing temperature it may crystallize. In such case before using warm it to bring to room temperature , It will again turn to its original condition.
The recommendation given here with should be checked by preliminary trials because of conditions during processing over which the company. ICO LTD has no control. The guideline for use do no constitute a warranty either expressed or implied of the fitness or suitability of the product for a particular purpose